Micro Gold Steel's HPFRC technology for the structural strengthening of columns, beams, beam-column nodes and existing collaborating top concrete slab

Discover the technical characteristics of the composite, the products, the fields of application, the advantages and the reference standards

Brochure mkp microcalcestruzzi Ruregold

Reinforced concrete columns

Thanks to the use of high performance, fibre-reinforced HPFRC concretes, it is possible to reduce the thickness of the material used to jacket the existing column, thereby quantity of reinforcement required while significantly increasing the performance specifications of the strengthened element.

Pilastri calcestruzzo armato microcalcestruzzi Ruregold

Beams – Strengthening against shear and flexural forces

On occasions it may be necessary to strengthen existing beams in reinforced concrete against flexural and shear forces, if increasing the section of the columns and node panels with FRCM and FRP structural strengthening is not sufficient.

In such cases it is necessary to increase the initial section using Ruregold micro-concrete, capable of replacing and/or upgrading the original flexural and shear reinforcement where the section was insufficient.

Travi rinforzo a flessione e taglio microcalcestruzzi Ruregold

Beam-column node panel

Reinforcing beam-column node panels represents an interesting application for increasing the capacity of the dissipation zones of reinforced concrete frames.

This type of application is particularly useful when applied to the non-confined portion of the node panel, by applying a jet of Micro Gold Steel micro-concrete.

Pannello nodo trave pilastro microcalcestruzzi HPFRC Ruregold

Strengthening the extrados (upper side) of existing slabs

The use of Ruregold high performance micro-concretes, with their high residual tensile strength on the extrados (upper side) of collaborating top concrete slabs is important in the case of floor decks with long, continuous spans resting on multiple supports.

In such cases, the presence of a material that renders it possible to work at reduced thicknesses (as little as 2 cm) and the capacity to confer residual tensile strength to the extrados (upper side) tension zone contributes significantly towards ensuring the load-bearing structure satisfies the required performance specifications.

Another potential use on the extrados (upper side) of existing collaborating top concrete slabs is characterised by its capacity to absorb high loads concentrated in low thicknesses.

Rinforzo estradosso solai esistenti microcalcestruzzi Ruregold

Strengthening columns

Strengthening beams

Rinforzo pilastri microcalcestruzzi Ruregold

Strengthening beam-column node

Strengthening slab

Rinforzo trave pilastro microcalcestruzzo Ruregold
Rinforzo solaio microcalcestruzzi Ruregold
Do you need more information? 
Click on the button at the bottom of the page,
one of our experts will contact you as soon as possible!

Per quale motivo ci vuoi contattare?

    Consenso al trattamento dei dati personali:*

    I campi contrassegnati con l’asterisco (*) sono obbligatori

    Iscriviti alla newsletter

    Rimani aggiornato sulle novità, le soluzioni e i prodotti del mondo Laterlite S.p.A.

      Consenso al trattamento dei dati personali:*

      I campi contrassegnati con l’asterisco (*) sono obbligatori

      How can we help you?

      Error: Contact form not found.

      Subscribe to our newsletter

      Stay up to date on news, solutions and products from the world of Laterlite S.p.A.

      Error: Contact form not found.

      How can we help you?

      Error: Contact form not found.

      How can we help you?

      Error: Contact form not found.

      How can we help you?

      Error: Contact form not found.

      This site is registered on wpml.org as a development site.